Preparation
10
NOTE
• Before connecting or disconnecting an external
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
• Select the appropriate setting for “DIGITAL
AUDIO OUTPUT” according to the connected
device. Refer to page 37.
• You can output the audio signal from the
[OPTICAL DIGITAL OUTPUT] terminal when
“DVD/CD” is selected as the source in the dis-
play window.
When you connect this system with an amplifier-
built-in subwoofer (not supplied), you can enjoy a
more dynamic bass sound. Refer to the manual of
the subwoofer for details.
Connecting an external
digital audio device
Main unit
(rear view)
Output
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input
AV amplifier with
a built-in decoder
Connecting a subwoofer
Audio cable (not supplied)
(Use the audio cable supplied with
the amplifier-built-in subwoofer or
a commercially available cable.)
Amplifier-built-in subwoofer
(not supplied)
Main unit
(rear view)
UX-GN9V[A].book Page 10 Wednesday, January 28, 2009 10:36 AM
To Next Page
Loading...
Need help?
General
