30
Daily Timer Operations
CANCEL
AUDIO
CLOCK/TIMER
Remote control
Setting the Daily Timer
INFO
Remote
ONLY
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at any one time.
• To exit the timer settings, press CLOCK/TIMER as
required.
• To correct a mis-entry during process, press CANCEL
(while holding SHIFT). You can go back to the previous
step.
Initial Daily Timer settings when shipped from the factory:
• DAILY 1: ON Time (6:00)/OFF Time (8:00)/Source
(TUNER FM 1)/Volume level (– –)
• DAILY 2: ON Time (7:00)/OFF Time (9:00)/Source
(TUNER FM 1)/Volume level (– –)
• DAILY 3: ON Time (10:00)/OFF Time (12:00)/Source
(TUNER FM 1)/Volume level (– –)
1 Select one of the timer setting modes you want to
set—DAILY 1 ON time, DAILY 2 ON time, or DAILY
3 ON time.
• When the clock has not been set, pressing
CLOCK/TIMER makes the System enter the clock
setting mode (see page 18).
2 Set the timer as you like.
Repeat the procedure for the following settings until
finished.
Ex.: When Daily Timer 1 setting mode is selected
ON
(Time)
Canceled Clock setting
(See page 18.)
Daily Timer 1 Daily Timer 2 Daily Timer 3
ON
(Time)
ON
(Time)
EN25-32_UX-GP7V[U]1.indd 30EN25-32_UX-GP7V[U]1.indd 30 6/16/08 11:22:31 AM6/16/08 11:22:31 AM
To Next Page
Loading...
Need help?
General
