EasyManuals Logo
Home>JVC>Stereo System>UX-P30 Series

JVC UX-P30 Series User Manual

JVC UX-P30 Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
15
Playing Back Discs (CD/CD-R/CD-RW)
This unit has been designed to playback the following
discs—CD, CD-R, and CD-RW.
Continued use of irregular shape discs
(heart-shape, octagonal, etc.) can damage the
unit.
General Notes
In general, you will have the best performance by keeping
your discs and the mechanism clean.
Store discs in their cases, and keep them in cabinets or on
shelves.
Keep the unit’s disc tray closed when not in use.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
“finalized”.
Usually you can play back your original CD-Rs or CD-
RWs recorded in music CD format. However, sometimes
they may not play depending on their characteristics or
recording conditions.
Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player’s lens is dirty.
CD-RWs may require a longer readout time. This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.
Playing Back the Entire Disc—Normal Play
1
Press CD 0 (or 0 on the unit).
The unit automatically turns on and the
disc tray comes out.
2
Place a disc correctly on the circle of
the disc tray, with its label side up.
When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press CD 3/8.
The disc tray automatically closes and
the first track of the CD starts playing.
The CD automatically stops when the last track of the
CD has finished playing.
To stop playing, press 7.
To remove the disc, press CD 0 (or 0 on the unit).
If the disc cannot be read correctly (because it is scratched,
for example)
“00 0000” appears on the display.
If no disc is inserted
“NO DISC” appears on the display.
If a unreadable CD-R or CD-RW is inserted
“BLANK CD” appears on the display.
DO NOT try to open or close the disc tray by hand
as it will be damaged.
CD
Track number
Elapsed playing time
CORRECT INCORRECT
CD
Total track number Total playing time
EN15-18_UX-P30[B]f.pm6 03.4.18, 4:12 PM15

Other manuals for JVC UX-P30 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-P30 Series and is the answer not in the manual?

JVC UX-P30 Series Specifications

General IconGeneral
BrandJVC
ModelUX-P30 Series
CategoryStereo System
LanguageEnglish

Related product manuals