JVC UX-P30 Series User Manual

20
Disc Direct Recording
Everything on the disc goes onto the tape in the same order as
it is on the disc, or according to the order you have made for
Program play.
On the unit ONLY:
1 Put a recordable cassette in with the
exposed part of the tape down.
2 Place a disc correctly on the circle of the
disc tray, with its label side up.
• If the current playing source is not the CD player,
press CD 3/8, then 7 before going to the next step.
• If you want to record on both sides of a tape, see “To
record on both sides—Reverse Mode.”
• If you do not want pauses of about 4 seconds recorded
between selections, press CD 3/8 twice. If nothing is
done, non-recorded pause will be automatically
recorded between selections.
3 Press REC.
The REC indicator lights up on the display and
recording starts.
After recording, the CD player and cassette deck
automatically stop.
To stop recording, press 7.
The tape stops after 4 seconds.
To remove the cassette, press ) on the unit.
To record on both sides—Reverse Mode
Press REV.MODE on the unit until
the indicator is lit.
• When using the reverse mode for Disc Direct
Recording, start recording in the forward (3) direction
first. When the tape reaches its end while recording a song
in the forward direction (3), the last song will be re-
recorded at the beginning of the reverse side (2).
If you start recording on the reverse side (2), recording
will stop when recording is done only on one side (reverse)
of the tape.
When making SLEEP timer settings while doing Disc
Direct recording
Set enough time to allow for the disc to finish playing; otherwise the
power will go off before recording is completed.
REC
One Track Recording
This recording method is convenient when you record tracks
while playing a disc. You can only record your favorite songs
on the tape.
On the unit ONLY:
1 Put a recordable cassette in with the
exposed part of the tape down.
2 Play the track on the disc you wish to
record.
3 Press REC.
The CD player returns to the beginning of that
track and the track is recorded on the tape.
After recording, the CD player and cassette
deck automatically stop.
4 Repeat steps 2 and 3 to record other tracks
you want.
REV.MODE
REC
P
H
O
N
E
S
A
U
T
O
R
E
V
E
R
S
E
P
H
O
N
E
S
A
U
T
O
R
E
V
E
R
S
E
EN19-26_UX-P30[B]f.pm6 03.4.18, 4:16 PM20

JVC UX-P30 Series Specifications

General

Brand	JVC
Model	UX-P30 Series
Category	Stereo System
Language	English