To Next Page

To Previous Page

OPERATION MODES

BLUETOOTH PLAY MODE

If you are using a Bluetooth audio device, make sure the devices are

within20-30ftofdistance,andthattherearenootherdevicesthatmay

intervene.

1. Press and hold button to turn ON the unit. The unit will give a

beeping sound to indicate it is in Bluetooth mode and the white LED

willashquickly.

2. Turn on the Bluetooth on your audio device.

3. In your device select to scan or search for Bluetooth devices, and

choose“JVCXS-KY3213B”.Nopasswordisrequired,butifyour

devicedoesrequireapassword,type“0000”.

4.Once paired, the speaker will make a beep sound and the indicator

lightwillbeslowlyashingwhite.

5.Press the or button on the unit to adjust the volume.

6. Hold the or buttonontheunittoskiptoPrevious/Nextsong.

7. Press button at the same time to Pause/Play music.

NOTE:Thespeakerwillpowero󰀨automaticallyafter30minsifit’snot

playing music or being operated.

AUX PLAY MODE

1. Hold the button to turn on the unit

2. Plugoneendof3.5mmaudiocableintotheheadphoneorline-out

jack of your audio device.Plug the other end of the cable into the

AUX jack located on the back of the unit. Unit will go to Aux in mode

automatically and the light will be steady white.

3. Press the or Button on the unit to adjust the system volume.

4.Press button to MUTE the system volume.

5.To skip songs or Play / Pause, use the audio device.

JVC XS-KY3213B User Manual

Questions and Answers: