Basic operations
24
Basic operations
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
7
During playback
Press 7, or press DVD STANDBY/ON
on the remote control unit or STANDBY/ON on the front
panel.
The unit memorizes the interrupted position.
• If you interrupt playback by pressing
7
and then turn off the power, the memory is not cleared.
7 While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press
7
while stopped.
*Turn on the unit by pressing STANDBY/ON (on the remote control) or (on the front panel).
To memorize the interrupted position
To resume playback
NOTES
• The resume function does not work with Audio CD and MP3 discs.
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the
resume point you stored.
To Next Page
Loading...
Need help?
General
