Stereo Audio System for Your iPod V10M10_IM_EN_10192006
www.i-Luv.com
- 16 -
MAINTENANCE & TROUBLESHOOTING GUIDE
Maintenance
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Protect your furniture. When placing the unit on a natural wood and lacquered finish, a cloth or other protective material should be placed between it
and the furniture.
Clean the unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can
damage the surface of the unit.
Troubleshooting
The stereo speaker system (i177) does not turn on.
o The AC adapter may not be connected properly. Check the connection.
o The wall outlet may not function. Try another outlet.
Your iPod does not fit into the built-in universal dock.
o The installed dock adapter is not the correct one. Check whether a correct dock adapter is installed.
o There might be some obstructions on the dock. Check whether there are any obstructions on the connector and on the dock. If everything is
secured, place your iPod back into the dock.
It does not recognize your iPod when docked.
o Your iPod may not be properly docked. Take your iPod out of the dock, and remove any obstructions on the connector from the dock and on
your iPod. Place your iPod back into the dock.
o Your iPod is frozen or locked up. Check whether your iPod operates correctly before placing it back into the dock. Please refer to the owner’s
instruction manual of your iPod.
o The software of your iPod is outdated. Upgrade the software on your iPod. For the details on how to upgrade the software on your iPod,
please visit Apple Computer’s website: http://www.apple.com
.
o You are using the first or second generation iPod. The i177 does not recognize first or second generation iPod. Use the line-in jack for the
first or second generation of iPod.
To Next Page
Loading...
Need help?
General
