Page 6
CONTROLLING THE PRINT HEAD
If you turn the printer off whilst printing, the print head may stop in the middle of the line. To
return the print head to the left side of the paper, turn the printer on, then off.
MISSING OR MISFORMED CHARACTERS
The █ character will show on the print out if the printer has detected incorrect data due to
interference with, or interruption to, the stream of incoming information.
Common causes for this error include incorrect positioning of printer with reference to the
instrument (this can either be due to the distance or the angle of operation), obstruction of
the infrared signal or even interference from another infrared emitting source.
ENVIRONMENTAL LIMITS
The KANE IRP-2 is designed for indoor use only.
Operating temperature: 0
o
C to 40
o
C (32
o
F to 104
o
F)
Storage temperature: -20
o
C to 60
o
C (-4
o
F to 140
o
F)
Humidity: 5% to 95% relative at 40
o
C (104
o
F) non condensing
BATTERIES
This product is designed for only rechargeable NiMh AA batteries. Four batteries are
needed. Types cannot be mixed.
WARNING: Do NOT attempt to recharge non-rechargeable batteries as this can lead
to batteries leaking and over-heating.
WARNING: Do NOT use Alkaline AA batteries
The battery charger supplied with the product is rated for indoor use only. Its voltage input
must be in the range 100 – 240 V ac at 50 – 60 Hz with a current capability of 0.3 A. The
chargers output voltage is 9 V dc at a maximum of 0.66 A.
The charger has no user serviceable components.
Only a correctly specified and rated charger must be used with the product. Kane part
number is 19278
To Next Page
Loading...
Need help?
General
