– 13
1 Fresh water filter
Unscrew the cover from the drain
opening of the fresh water tank.
Take out the fresh water filter and
rinse with clean water.
Check the condition of the seals be-
tween waste water tank and cover,
replace if required.
Have the prescribed inspection car-
ried out by the customer service.
Compress the fastening devices
and pull the vacuum lips out of the
vacuum bar towards the bottom.
Remove the vacuum lips from the
holder.
Note:
Thanks to the perforation pattern the
vacuum lips cannot be mixed up. They
cannot be turned and reinstalled.
Replace vacuum lips.
Insert the holder with the vacuum
lips into the vacuum bar and snap
into place.
몇 WARNING
Risk of crushing due to the park sup-
port folding in during brush replace-
ment. Turn the steering wheel 45° to
the left before commencing brush re-
placement.
Press the release button for the
brush roller and swivel the brush
roller toward the bottom and pull it
off the driver.
Place the new brush roller on the
driver and lock into place on the op-
posite side.
To ensure a reliable operation of the
appliance maintenance contracts can
be concluded with the competent
Kärcher sales office.
DANGER
The removal of the batteries may only
be performed by Kärcher Customer
Service or a specialist.
Classification as whether the batteries
are damaged is done by an authorised
Customer Service technician
The Chapter "Safety instructions" for
handling accumulators must be ob-
served unconditionally.
Monthly
Yearly
Maintenance Works
Replacing the suction lips
Replacing the brush roller
Maintenance contract
Disposal
Removing the batteries
15EN
To Next Page
Loading...
Need help?
General
