6 English
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
Î STEP 1:
Insert wheels into the side holes of
the unit.
Î STEP 2:
Slide the transport handle into place.
Î STEP 3:
A Pull out the locking slide of the trigger
gun handle.
B Insert the small end of the high pres-
sure hose into place.
C Push the locking slide back into the
trigger gun to lock the hose in posi-
tion.
Î STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
Î STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
