Kärcher K 2.360 User Manual

English 9
Detergents can only be applied at low
pressure setting (Mix).
Î STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
Î STEP 2:
One Gallon Ready to Use Instruc-
tions:
Fill the Detergent Tank with the se-
lected detergent.
Kärcher SoapPac Instructions:
Kärcher SoapPacs are designed to
completely dissolve in water. A Kärcher
SoapPac Sample of Concentrated Vehi-
cle Wash & Wax is included with your
pressure washer. This product is pack-
aged in self dissolving film that is formu-
lated to quickly remove dirt, grease and
grime, while leaving the surface film-
free. It provides a just-waxed look in one
simple product
Do not cut or tear open the Kärcher
SoapPac. Do not handle with wet
hands. Avoid contact with skin, eyes
and mucous membranes. May cause
irritation. Harmful if swallowed. Mix
only with water. DO NOT mix with
other chemicals or cleaning agents.
– Insert one SoapPac into a bucket.
– Fill the bucket with cool or warm wa-
ter (1/4 gal/1 qt /1 L).
– Agitate water in the bucket and wait
for product to completely dissolve.
– Fill the solution into the detergent
tank.
– Apply detergent on low pressure set-
ting.
For other Kärcher SoapPac Deter-
gents, check your retailer or visit our
website: www.soappac.com for more
information.
WORKING WITH DETERGENTS

Kärcher K 2.360 Specifications

General

Brand	Kärcher
Model	K 2.360
Category	Pressure Washer
Language	English