10 English
Mount the handles
1. Attach the transport handle.
2. Attach the carrying handle.
Close the detergent tank
1. Close the detergent tank with the lid.
Mounting the coupling for the
water connection
1. Screw the coupling for the water
connection onto the water connec-
tion of the device.
Initial startup
1. Place the device on a flat and level
surface.
2. Insert the high-pressure hose into
the quick coupling until it audibly
latches into place.
3. Insert the high-pressure hose into
the high-pressure gun until it audibly
latches into place.
Note
Take care to ensure the correct
alignment of the nipple.
4. Check for a secure connection by
pulling on the high-pressure hose.
5. Insert the power plug into a working
outlet.
To Next Page
Loading...
Need help?
General
