EasyManuals Logo

Kärcher SE 4002 User Manual

Kärcher SE 4002
Go to English
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
– 8
Attachment for wet/dry vacuuming
25 Attachment for wet/dry vacuuming
26 Floor nozzle with hard surface insert
27 Crevice nozzle
28 Upholstery nozzle
29 Filter bag
Illustration
Remove the fresh water reservoir.
Press the release and remove the tank.
Note: The motor casing can only be re-
moved if the fresh water reservoir was
removed first.
Illustration
Remove the motor casing. For this,
fold the carrying handle forward to un-
latch the reservoir. Remove the acces-
sories and swivel casters from the
reservoir.
Illustration
Turn the container, press in the swivel
casters in the openings at the base of
the container till the end-point.
Illustration
Turn the motor casing around and at-
tach the foam filter to the filter basket.
Insert the filter cover and turn to lock.
Install the motor casing. Pull up on
the carrying handle to lock.
Illustration
Install the fresh water reservoir. In-
sert the bottom part first and then press
toward the top on the motor compart-
ment to check if it is locked in.
Illustration
Attach the suction hose and the spray
hose to the connectors on the appli-
ance.
Note: Press the suction hose tightly into
the connector to lock it into place.
Illustration
Connect the spray/suction pipes and at-
tach to the handle. Center the locking
lever when attaching it, turn clockwise
to lock.
Attach the floor nozzle to the spray/suc-
tion pipes and secure with locking lever.
The appliance is now prepared for wet
cleaning.
Always work with an inserted foam
filter - during wet as well as dry vac-
uum cleaning!
Health risk, risk of damage!
Check the object to be cleaned prior to us-
ing the appliance in an inconspicuous place
for colour fastness and water resistance.
Do not clean water-sensitive floor cover-
ings such as wood floors (the moisture
could penetrate and damage the floor).
Note
Warm water (max. 50°C) will increase the
cleaning effect.
Use the wash floor nozzle.
Work without the hard surface insert.
Please only use the carpet cleaner RM 519.
Use the wash floor nozzle.
Slide the attachment for hard surfaces
onto the spray ex floor nozzle from the
side. The bristles should point towards
the back.
Use the wash hand nozzle.
Note: You can remove the water reservoir
to fill it or you can fill it directly on the appli-
ance.
Illustration
Flip the reservoir cover up.
Add 100 - 200 ml (volume depends on
degree of contamination) of RM 519
into the fresh water reservoir, then add
tap water - do not overfill.
Close the reservoir cover.
Before Startup
Operations
Wet cleaning of carpets/hard
surfaces/upholstery
Wet cleaning of carpeted floors
Wet cleaning of hard surfaces
Wet cleaning of upholstery
Fill up fresh water reservoir
16 EN
Downloaded From Vacuum-Manual.com Manuals

Table of Contents

Other manuals for Kärcher SE 4002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher SE 4002 and is the answer not in the manual?

Kärcher SE 4002 Specifications

General IconGeneral
Vacuum210 mbar
Airflow70 l/s
Machine typeRide-on
Cleaning typeDry&wet
Maximum area covered- m²
Working width (brush)230 mm
Maximum area performance- m²/h
Fresh water tank capacity4 L
Power sourceAC
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Maximum input power1400 W
Annual energy consumption- kWh
WheelsYes
Cord length7.5 m
Hose length2 m
Dust capacity- L
Product colorYellow
Number of wheels4 wheel(s)
Dust container typeBagless
Package weight11800 g
Weight and Dimensions IconWeight and Dimensions
Depth441 mm
Width386 mm
Height480 mm
Weight7800 g

Related product manuals