8English
3. Close the spray bottle.
4. Fit the microfiber wipe cover on the
wiping attachment.
Operation
Starting operation
1. Set the spray nozzle to the "ON" po-
sition.
2. Press the spray lever and spray the
detergent evenly onto the surface to
be cleaned from a distance of
20 cm.
3. Loosen the dirt using the microfiber
wipe cover.
4. Set the power switch to the "ON" po-
sition.
The device switches on.
The LED indicator light lights up.
5. Pull the device over the surface to
be cleaned to vacuum up the waste
water.
6. Pull out the side spacers to prevent
the squeegee blade from catching
when working at the edges.
1.
2.
1.
ON
ON
To Next Page
Loading...
Need help?
General
