SAFETY PRECAUTIONS
1. Beforeoperation. ground the instrument through a proper-
ly earth grounded power receptacle.
Z&fore servicing. disconnect the instrument from the
power line and all other equipment, and consult the Model
199 Instruction MamaI.
3. Do not touch any terminals while the instrument is turned
on or connected to any other test equipment.
4.Do not exceed the maximum input levels es stated in the
specifications for the instrument bee the Model 199 In-
struction Manuall.
5. Use the special precautions listed in paragraph 2.6 of the
Model 199 Instruction Manual when testing high-energy
circuits.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General