To Next Page

To Previous Page

Performance Veriﬁcation

This section contains performance veriﬁcation procedures for the speciﬁcations

marked with the

symbol. Additional test equipment is required to complete the

veriﬁcation

procedures. (See Table 27 on page 24.)

These procedures cover all models of theSeries2200ProgrammableDCPower

Supplies. I

gnore checks that do not apply to the speciﬁc model you are testing.

Print the test record on the following pages, and use it to record the performance

test resul

ts for your power supply.

NOTE. Each individual performance test must be done for each channel. This

means two times for the 2220-30-1 and 2220J-30-1. It means three times for

the 2230-30-1 and 2230J-30-1.

NOTE. Completion of the performance veriﬁcation procedure does not update the

stored

time and date of the latest successful adjustment. The date and time are

updated only when the factory adjustment procedures are successfully completed.

Series 2200 Multichannel Programmable DC Power Supplies Technical Reference 13

Keithley 2200 Series User Manual

Other manuals for Keithley 2200 Series