REMOTE CONTROL
25
F-46 = 0 Subnet Mask part 4 of 4
F-43 = 172 Gateway part 1 of 4
F-44 = 16 Gateway part 2 of 4
F-45 = 21 Gateway part 3 of 4
F-46 = 101 Gateway part 4 of 4
F-57 = 1 Enable Sockets
Note
The socket function is only available for firmware
version V1.12 or above. See the user manual to
check your firmware version number.
USB Remote Control Function Check
Functionality
check
Invoke a terminal application such as Hyper
Terminal.
To check the COM port No, see the Device
Manager in the PC. For WinXP; Control panel
→ System → Hardware tab.
Run this query command via the terminal after
the instrument has been configured for USB
remote control (page 21).
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version
in the following format.
XXXXXX,AAAAAA,TW123456,01.00.20110101
Manufacturer: XXXXXX
Model number : AAAAAA
Serial number : TW123456
Firmware version : 01.00.20110101
To Next Page
Loading...
Need help?
General
