Keithley 2461 User Manual

The bottom half of the display is the swipe screen area, which
contains the following additional screens:
 SOURCE swipe screen: Displays the source settings. When the
output is on, this displays either the programmed source value or
the actual source, depending on the setting of source readback.
On the source swipe screen, you can set the source range, source
value, and source limit. This is the default swipe screen.
 SETTINGS swipe screen: Allows you to turn features on and off,
such as the measurement filter, math functions, relative offset,
and NPLCs. You can touch the calculator or gear icons on the
right side of the swipe screen header bar to open the calculations
or source serrings screens.
 GRAPH swipe screen: Shows a graph of the readings in the
presently selected buffer. You can touch the graph icon on the
right side of the swipe screen header bar to open it to a
full screen view.
 STATISTICS swipe screen: Contains statistics based on the
readings in the active buffer.
 USER swipe screen: Displays information that you can define
through a remote interface.
Examples of the SETTINGS and GRAPH swipe screens are shown
below.
In the SETTINGS swipe screen shown here, the Auto Zero feature
is turned on. The other settings are turned off.

Keithley 2461 Specifications

General

Brand	Keithley
Model	2461
Category	Measuring Instruments
Language	English