7. Operation and Functions
7-1-3 Inner Control Panel
Initial Temperature by power input
Freezer : 0ºF / Refrigerator : 37ºF
Press and hold ＂Water Filter” button for 3sec, “CHANGE” icon LED OFF
※ After about 6 months from power on or Filter Reset, the icon LED ON.
Default : “ ON “ LED on.
“OFF” → “ON” (repeat)
□ How to Start : Press and hold this button for 3sec.
□ How to Proceed : The icon LED On, Quick ice cube production mode for 24hr
□ How to End
1) Time Limit.
2) If no water comes into the icemaker for 6hr, the operation is canceled.
1
st
Time press Ⓒ button “ON” LED On
Default : “ ICONS” and “ LIGHT“ LED off.
2
nd
Time press Ⓒ button “ON” LED Off and “DIM” LED on
3
rd
Time press Ⓒ button “ON” and “DIM” LED on
4
th
Time press Ⓒ button “ON” and “DIM” LED off (repeat)
ºF : 0 → -2 → -4 → -6 → -8(Coldest) → 6 → 4 → 2 → (repeat)
℃ : -18 → -19 → -20 → -21 → -22(Coldest) → -15 → -16 → -17 → (repeat)
Freezer Accela Chill Function
□ How to Start : Press and hold this button for 3sec.
□ How to Proceed : the icon LED ON, Coldest Temp for 3000min
□ How to End : Time Limit or Any press for changing Temp or Power Rest
ºF : 37 → 35 → 33(Coldest) → 45 → 43 → 41 → 39→ (repeat)
℃ : 3 → 2 → 1(Coldest) → 7 → 6 → 5 → 4→ (repeat)
Refrigerator Accela Chill Function
□ How to Start : Press and hold this button 3sec.
□ How to Proceed : the icon LED ON, Coldest Temp for 360min
□ How to End : Time Limit or Any press for changing Temp or Power Rest
ING
To avoid risk of electrical s
disconnect unit from power
an cause death or severe personal injury,
25 / 69
vicing unless tests require power.
To Next Page
Loading...
Need help?
General
