Technician SAFETY Precautions
Please observe the following safety precautions in order to use safely and correctly the refrigerator and to
prevent accident and danger during repair
●
To avoid electrical shock, disconnect power cord from wall outlet and wait for more than three minute
before handling electronic components or capacitors.
●
Disconnect power cord from wall outlet before replacing or repairing electric components.
●
After unplugging the refrigerator, wait at least 5 minutes before plugging it back.
●
Position the power cord in a manner to prevent damage when moving the refrigerator back into position.
●
Do not plug a damaged power cord into the electrical outlet.
●
Advise the consumer when the refrigerator is not on a dedicated electrical circuit as overloading may cause fire.
●
Do not plug the refrigerator into a receptacle that is not properly grounded or not properly polarized or has
incorrect voltage level.
●
Advise the consumer when any of the installation requirements are not met.
●
Use only factory authorized parts and repair procedures.
●
Advise the consumer to only perform procedures listed in the owner’s manual.
●
When evidence of moisture is present in or on any electrical component or circuit, unplug the refrigerator
Completely dry or replace the component, determine the cause and take proper steps to prevent reoccurrence.
●
To prevent physical injury, do not touch moving parts such as fan blade or icemaker rake.
●
Follow all safety precautions listed in the owner’s manual and advise the consumer as needed.
●
Remove any objects on top of the refrigerator, and any open containers inside the refrigerator before moving the
refrigerator.
●
When scrapping any refrigerator or freezer, remove the door/drawer gaskets to prevent children from suffocation.
●
This refrigerator contains flammable refrigerant. Follow all relative company, federal, and local safety guidelines
To Next Page
Loading...
Need help?
General
