7fPPER APP{,fCi:,i i()i'_,
SETTINGS
t m
Stitch Selector ........ ,,,
Stitch Length Control . . . 12
Zipper Foot.
Thumb _
screw
)er foot
mg
screw
Needle entr,,
(right)
Fig. 1
REGU! _R ZIPPER
Adjust the foot so the needle is sewing
through the center hole of the foot and
one groove of the foot is riding on the
teeth of the zipper. See Fig. 2. Follow
the zipper manufacturer's instructions.
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch.
TNVISIBLE ZIPPER
Pin or baste zipper to fabric and place
the work in position under the presser
foot. Loosen the zipper foot adjusting
screw to set the foot on the left side of
the needle, and sew the left side zipper
as shown. (Fig. 1) To sew the right-
side zipper, loosen the screw and bring
the foot to the right side of the needle.
CORDING
Foot can also be used to make cording
for slipcovers etc. Cover a cord with a
strip of bias fabric and sew as shown in
Fig. 3.
NOTE:
Use "Low Bar Sewing Machine ZIP-
PER FOOT" (6757) for "invisible zipper"
and "cording", which can be obtained at
any stores of Sears Roebuck and Co.
33
To Next Page
Loading...
