o _t_DTH
SETTINGS
Special Stitch Dial - Red Dot
Stitch Widfl_ ContF_ol - 1 __o4
S_J1ch Length Contl-o! - _IW i',!u_;_be7
Zigzag Presse_ Foot
This type of stitching greatly expands
the use of your machine This is the
feature that enables you to overcast
seams, blind hem, applique, button-
hole, monogram, and make all the
pretty embroidery designs by machine,
Simply use the settings indicated in
the illustration for the simple zigzag
Follow directions given in the follow-
ing pages for more specific uses
Fig, 1
Fig. 2
t s
OVERCASTII\!G
This is one of the more frequently used
zigzag stitches in garment construc-
tion, You may want to overcast
along the raw edge of each seam
allowance or fold the raw edge toward
the garment and stitch,
Fig_ 1 shows the raw edge finished,
Fig 2 illustrates the folded edge stitch-
ed
Stitch so the needle pierces the fabric
just short of the outside edge, Raw or
worn edges of older garments can be
overcast to prevent further raveling
I[qTERFACIi',[G DARTS
To reduce bulk of interfacing darts,
cut interfacing down center between
dart lines, Overlap cut edges, match-
ing dart lines Zigzag stitch along mark-
ing line from point to wide end of dart,
Trim both raw edges close to stitching
To Next Page
Loading...
Need help?
General
