THR DiNG TOP READ
1, Rain thread take,up lever to its highest
position by turning hand wheel toward you,
Raise preuer foot lever,
Place thread' Wool on _ pin. Piece
appropriate spool cap over the _. See
Fig. 1.
Holding thread taut with right hand, draw
thread through rear thread guides (A and B)
and Into threading channel (C) toward you,
(Fig, 1)
2, Draw thread down channel (C) end up
channel (O). Thread take-up lever IE) by
guiding thread through the slot and lead
thread down through channel (D) again.
Pass thread through lower thread guide (F)
and needle bar thread guide (G) and thread
n_le from front to back, (Fig. 2 and 3)
12
THMADING DOUBLE NEEDLE*
Place second spool of thread on _ond spool
pin, end thread machine as you would for a
single needle except double thread _idee are
provided at (F) and (G) in Fig. 2 end 3. Draw one
thread through each of these and through each
side of _ie from front to beck. Make certain
threeds are not crossed.
*Available at most Sears retail stores and
catalog,
O
To Next Page
Loading...
Need help?
General
