Kenmore 17830 User Manual

STRETCH STITCHES
1,-4
mmmO _l
I
_/
4
tow zn
The stitches shown at right are all for use
with stretch and knit fabrics,
t, S_ioht Stretch
2, Rick-Rack Stretch
3, ElasUc Edge Stretch
4, _r_st Stretch
5, Ovedock Stretch
6. Elasttc S_toh
7, Sergtng Stretch
8, Patching Stretch
9, Smocking Stretch
ADJUSTING STITCH LENGTH
Depending upon your preference in stitch
_tte_, y_ my make stretch stitches.
cl_r together without changing the balance
of stitches by turning stitch length control
wtthin yellow zone,
RECOMMENDATION
1. It is recommended to use the Q set for
sewing knit end woven synthatlc fabrics
to prevent irregular stitches or skipped
stitches,
2, !1 is nece-_o,.aryto use an interfacing or
backing when sewing very soft and thin
knits or woven synthetic fabrlcs to have
better stitch formation,
®®®®
NOTE: If the reverse stitch lever is operated
while sewing any of the above stretch
stitches, the _chine sews only
straight or plain zigzag stitch,

Kenmore 17830 Specifications

General

Brand	Kenmore
Model	17830
Category	Sewing Machine
Language	English

Summary

Sewing Machine Identification and Basic Setup

Machine Component Identification Chart

Diagrams labeling all parts of the sewing machine for user familiarity.

Setting Up and Operating Controls

Guide to setting up the machine, using foot control, power switch, and speed settings.

Free-Arm Conversion and Accessories

Instructions on converting to free-arm sewing and accessing the accessory box.

Needle, Threading, and Bobbin Procedures

Covers needle selection, threading the machine, and winding the bobbin.

Presser Feet and Stitch Adjustments

Details on presser feet, stitch controls, and thread tension for optimal sewing.

Sewing Techniques and Stitch Guide

Machine Settings and Stitch Selection

Visual guide to recommended settings for various stitch types.

Straight Stitching and Seam Basics

Instructions on straight stitching, back tacking, and turning corners.

Specialty Stitches: Zigzag and Stretch

Guidance on using zigzag, stretch, and decorative stitches for various applications.

Zipper, Buttonhole, and Hemming Procedures

Procedures for sewing zippers, buttonholes, and different types of hemming.

Decorative Stitching and Embroidery

Instructions for creating decorative patterns using machine stitches.

Sewing Machine Maintenance and Cleaning

Cleaning and Lubricating Key Areas

Steps for cleaning feed dogs, shuttle area, and oiling internal components.

Routine Maintenance and Bulb Replacement

Guidance on oiling under covers and instructions for changing the light bulb.

Sewing Machine Troubleshooting Guide

Resolving Stitching and Thread Issues

Solutions for irregular stitches, needle breaks, thread bunching, and puckering.

Troubleshooting Operation and Fabric Feeding

Steps for issues like skipped stitches, fabric feeding problems, jams, and non-operation.