19
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned on when a cycle is
selected. (See “Preset Cycle Settings” in “Cycles.”)
■ ATC works for the wash temperature with Extra Hot, Hot,
Warm, and Cool settings.
■ The Cold wash temperature depends on the cold water at
your faucet.
■ ATC works for the rinse temperature where the wash temp
setting is marked with an asterisk, such as Warm*. All other
rinse temperatures are cold.
Laundry Guide
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
*Prewash and Soak cannot be selected at the same time.
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay
Start
Prewash/
Auto Soak*
Stain
Treat
Save
Energy
Plus
2nd Rinse/
Skincare
Rinse II
Extended
Spin
Normal/Casual Normally soiled blouses, shirts, overalls,
etc., made of polyester, nylon, cotton, linen,
or cotton blends
✔✔ ✔ ✔ ✔
Heavy Duty Heavily soiled underwear, towels, shirts,
etc., made of cotton
✔✔ ✔✔ ✔ ✔
Whitest Whites Soiled white fabrics ✔✔ ✔✔ ✔ ✔
Sanitary Heavily soiled underwear, towels, work
clothes, diapers, etc.
✔✔ ✔ ✔ ✔
Rinse/Drain &
Spin
All loads ✔✔
Clean Washer No clothes
Silk/Ultra
Delicate
Silk or Ultra Delicate fabrics identified as
machine washable.
✔✔
Handwash/Wool Woolens with a felt-free finish and special-
care items identified as machine washable.
✔✔
Kids Wear Children's clothing or any fabric that
requires extra rinsing
✔✔ ✔ ✔ ✔
Bulky/Bedding Normally soiled blankets and comforters ✔✔
Express Wash Small loads of 2-3 lightly soiled cotton,
polyester, nylon, and cotton blends.
✔✔✔
To Next Page
Loading...
Need help?
General