1. Verify that the power cord is
disconnected from the outlet.
2. Disconnect the hose from the vacuum by
turning counter-clockwise.
3. Undo the latches and remove the
powerhead from the collection tank.
Place powerhead on a soft, clean
surface upside down.
4. Clear all dirt and debris from the
collection tank and hose into a proper
waste container.
5. Clean or replace the filters.
6. Check the hose, accessories, and power
cord to verify that they have not been
damaged.
7. Place the powerhead back on collection
tank and secure latches.
- 10 -
VACUUM MAINTENANCE AND CARE
WARNING
Always disconnect the plug from the
outlet before removing the powerhead
from the collection tank.
EMPTYING THE COLLECTION TANK
Always follow all safety precautions when performing maintenance to the vacuum cleaner.
To Next Page
Loading...
Need help?
General
