EasyManuals Logo
Home>KENT>Wood stove>EVOLUTION8 INSERT

KENT EVOLUTION8 INSERT User Manual

KENT EVOLUTION8 INSERT
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
WOOD SELECTION
Few things affect the performance of your heater as much as the fuel you burn. Take note of the following:
WHAT NOT TO BURN
* Softwood (except kindling)
* Wet or unseasoned wood
* Treated or painted timber
* Saltwater wood
* Coal or charcoal
* Garbage, plastic etc
* Any solvents, kerosene, petrol or any
flammable liquid.
WHAT TO BURN
Quite simply, dry seasoned hardwood.
From when wood is first cut down, it takes up to 12
months of dry storage for the wood to season
properly. The seasoning process is underway
when cracks begin to appear at the ends of cut
timber.
Use of moist or unseasoned wood will result in
excessive smoke, longer startup times, a lazy
flame that requires more air to stay alight,
creosote build up in the flue and on the door
glass, and a much less powerful fire. The reason is
simple. Heat that would normally be going into
the room is wasted boiling water that is trapped
inside the wood. This poor performance costs you
m o n e y i n w a s t ed f u e l a n d i n c re a s e d
maintenance.
It is difficult to determine if wood is dry just by
looking at it. If you can hear the wood sizzle and
hiss, or can see moisture bubbling from the wood
surface, then your wood is too wet. In practice, the
best thing you can do is to be sure of the source.
Buy your wood from reputable wood merchants.
Make sure you store the wood correctly.
WOOD STORAGE
It is important that wood be stored under cover.
Even wood that is years old will absorb large
quantities of moisture if exposed to the elements.
It is advisable that wood is stacked to allow some
air flow in and around the logs. This will help keep
the wood dry.
WOOD SPLITTING
It is best to have on hand a good range of wood
sizes to help control the fire. The rule of thumb is:
the hotter the fire, the bigger the log you can put
in.
* You need very small pieces of kindling to get
the fire started efficiently.
* Small pieces up to about 50mm thick are good
when the fire is still being established, or when
you want to revive a fire that has burnt low.
* Larger logs are excellent for long burns once
the fire is well established.
7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KENT EVOLUTION8 INSERT and is the answer not in the manual?

KENT EVOLUTION8 INSERT Specifications

General IconGeneral
BrandKENT
ModelEVOLUTION8 INSERT
CategoryWood stove
LanguageEnglish

Related product manuals