Setting Up
45English
To register original image
You can load an image from the connected
USB device and set it for the wallpaper image.
Before operating this procedure, it is necessary
to connect the device which has the image to
load.
1
Touch [User1 Select] or [User2 Select] in
the Wallpaper Customize screen.
2
Select the image to load.
3
Touch [Enter].
The selected image is loaded and
the display returns to the Wallpaper
Customize screen.
NOTE
• Touching [ ] rotates counter clockwise.
• Touching [
] rotates clockwise.
• Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP
(.bmp)
AV Setup
You can set AV parameters.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP screen appears.
3
Touch [AV].
AV screen appears.
4
Set each item as follows.
■ [TV Tuner Control]
Sets when connecting the TV tuner to AV
INPUT.
[ON]: Set to ON when connecting the 3rd
party TV tuner. AV-IN1 Name is set to TV. If
you connect the TV tuner made by DOS
and watch TV, you can perform some
simple operations by touching the screen
of this unit.
[OFF] (Default): Set to OFF when not
connecting the 3rd party TV tuner.
■ [AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, AV-IN, USB, or iPod
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, iPod, Spotify, Bluetooth
audio, Mirroring (WebLink), Apple CarPlay
or Android Auto as the main source, you
cannot select USB or iPod as the AV output
source.
■ [Driving Position]
Select the driving position (left or right).
“Left”/ “Right” (Default)
!B5A-2302-00b_DDX_X_En.indb 45 2019/04/26 10:41
To Next Page
Loading...
Need help?
General
