Kenwood DMX958XR User Manual

Bluetooth Control
55English
To switch the connected device to a
Bluetooth device
1
Touch the icon area on the right side of
the Bluetooth device name you want to
connect.
NOTE
• In the following cases, a confirmation message for
disconnection appears. Touch [Ye s ] and follow to
next step 2.
– Select any device when Apple CarPlay is
connected.
– Select the connected device when Android
Auto is connected.
2
Set each profile as follows.
■ [TEL (HFP) 1], [TEL (HFP) 2]
Select when the device is connected with
the unit as a Hands-Free phone 1 or 2.
■ [Audio (A2DP)/App (SPP)]
Select to use as an audio device or to
interwork with an application installed in a
smartphone.
3
Touch [Close].
To delete the registered device
You can delete the device that is registered in
device list.
1
Touch [ ] on the Device List screen.
2
Touch the device name to check.
■ [þ All]
Selects all Bluetooth devices.
■ [¨ All]
Clears all check marks.
NOTE
• The following devices are not deleted.
– Wired Apple CarPlay device which is not paired
– Connected Android Auto device
3
Touch [Delete].
 Confirmation message appears.
4
Touch [Ye s ].
 All the selected device(s) is deleted.

Kenwood DMX958XR Specifications

General

Brand	Kenwood
Model	DMX958XR
Category	Car Receiver
Language	English