Kenwood DMX958XR User Manual

Connection/Installation
90
Ñ Removing the unit
1) Remove the trim plate. (P.89)
2) Insert the two extraction key (accessory 5)
deeply into the slots on each side, as shown.
5
3) Lower the extraction key toward the bottom,
and pull out the unit halfway while pressing
towards the inside.
NOTE
• Be careful to avoid injury from the catch pins on
the extraction key.
4) Pull the unit all the way out with your hands,
being careful not to drop it.

Kenwood DMX958XR Specifications

General

Brand	Kenwood
Model	DMX958XR
Category	Car Receiver
Language	English