Do you have a question about the Kenwood KAC-5202 and is the answer not in the manual?
max power output | 250W |
---|---|
rated power output 4Ω normal | 40W x 2 |
rated power output 4Ω bridge | 120W x 1 |
rated power output 2Ω normal | 60W x 2 |
frequency response | 5Hz~50kHz |
signal to noise ratio | 100dB |
sensitivity max rated output | 0.2V |
sensitivity min rated output | 5.0V |
input impedance | 10kΩ |
low pass filter | 80Hz |
operating voltage | 14.4V |
---|---|
current consumption | 16A |
dimensions | 250 x 52 x 160 mm |
---|---|
dimensions in inches | 9-13/16 x 2-1/16 x 6-5/16 inch |
weight | 2.1kg |
weight in pounds | 4.6 lbs |