16
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting bracket and
secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the unit.
Removing the unit
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then follow the arrows as
shown on the illustration.
Bend the appropriate tabs to hold the sleeve
firmly in place.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Dashboard of your car
Do the required wiring.
(Page 17)
JS_KWD_KMM_105_MN_M2N_EN_4th Draft.indd 16JS_KWD_KMM_105_MN_M2N_EN_4th Draft.indd 16 7/24/2018 11:36:45 AM7/24/2018 11:36:45 AM
To Next Page
Loading...
Need help?
General
