Kenwood R-A100 User Manual

R-A100/A150/V300/V350
53
SPECIFICATIONS
R-A100 (En/M)
Audio section
Effective output power
1kHz,10% T.H.D.,at 6 Ω...............................50 W + 50 W
Rated output power
1kHz,1% T.H.D.,at 6 Ω.................................40 W + 40 W
Total harmonic distortion (1 kHz, 25 W,6 Ω)................0.02 %
Frequency response
LINE (CD)...........................10 Hz ~ 80 kHz, +0 dB, -3 dB
Signal to noise ratio (IHF'66)
LINE (CD) ................................................................90 dB
Input sensitivity / impedance
LINE (AUX) ..............................................200 mV / 47 kΩ
Tone controls
BASS ...................................................± 8 dB (at 100 Hz)
TREBLE .............................................± 8 dB (at 100 kHz)
Output level / impedance
TAPE REC ..............................................200 mV / 2.2 kΩ
SUB WOOFER PRE OUT...................................2V / 1kΩ
FM Tuner section
Tuning frequency range........................87.5 MHz ~ 108 MHz
Usable sensitivity
MONO...........................................1.6 µV (at 75 Ω) / 15.2 dBf
(75 kHz dev.,SINAD. 30 dB)
50dB quieting sensitivity
STEREO ...............................31.6 µV (at 75 Ω) / 41.2 dBf
(75 kHz dev.)
Signal to noise ratio (1 kHz, 75 kHz dev)
MONO...............................................73 dB (65 dBf input)
STEREO ...........................................68 dB (65 dBf input)
Selectivity (IHF ± 400 kHz)............................................50 dB
Stereo separation (1 kHz) .............................................40 dB
Frequency response ............30 Hz~15 kHz, +0.5 dB, -3.0 dB
AM Tuner section
Tuning frequency range............(9 kHz) 531 kHz ~ 1,602 kHz
(10 kHz) 530 kHz ~ 1,610 kHz
Usable sensitivity
(30% mod., S/N 20 dB).....................20 µV / (700 µV / m)
Signal to noise ratio
(at 30% mod 1 mV input).........................................48 dB
General
Power consumption......................................................100 W
AC outlet
UNSWITCHED ...............................2 : (Total 100 W max)
Dimensions..........................................................W : 400 mm
H : 106 mm
D : 382 mm
Weight (net) ..................................................................6.1 kg
R-A150 (En/T)
Audio section
Rated output power
(DIN)1 kHz, 0.7% at 6 Ω...............................50 W + 50 W
Total harmonic distortion (1 kHz, 25 W, 6 Ω)...............0.02 %
Frequency response
LINE (CD)...........................10 Hz ~ 80 kHz, +0 dB, -3 dB
Signal to noise ratio (IHF'66)
LINE (CD) ................................................................90 dB
Input sensitivity / impedance
LINE (AUX) ..............................................200 mV / 47 kΩ
Tone controls
BASS ...................................................± 8 dB (at 100 Hz)
TREBLE .............................................± 8 dB (at 100 kHz)
Output level / impedance
TAPE REC ..............................................200 mV / 2.2 kΩ
SUB WOOFER PRE OUT.................................2 V / 1 kΩ
FM Tuner section
Tuning frequency range........................87.5 MHz ~ 108 MHz
Usable sensitivity (DIN)
MONO......................................1.2 µV(at 75 Ω) / 13.2 dBf
(40 kHz dev., S/N 26 dB)
STEREO ......................................35 µV(at 75 Ω) / 42 dBf
(46 kHz dev., S/N 46dB)
Signal to noise ratio ( DIN weighted at 1kHz, 40 kHz dev.)
MONO............................................65 dB (65.2 dBf input)
STEREO ........................................60 dB (65.2 dBf input)
Selectivity (DIN ± 300 kHz)............................................64 dB
Stereo separation (DIN,1 kHz) ......................................36 dB
Frequency response .........30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
MW Tuner section
Tuning frequency range................................531 ~ 1,602 kHz
Usable sensitivity
(30% mod., S/N 20 dB).....................20 µV / (700 µV / m)
Signal to noise ratio
(at 30% mod. 1mV input).........................................48 dB
LW Tuner section
Tuning frequency range ...........................153 kHz ~ 279 kHz
Usable sensitivity
(30% mod.,S/N 20 dB).............................................35 µV
Signal to noise ratio
(at 30% mod. 1mV input).........................................45 dB
General
Power consumption......................................................120 W
AC outlet
UNSWITCHED ...............................2 : (Total 100 W max)
Dimensions..........................................................W : 400 mm
H : 106 mm
D : 382 mm
Weight (net) ..................................................................6.1 kg
NotesNotes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
notice.
2. Full performance may not be exhibited in extremely cold locations (below 0 deg.C).
R-A100/V300(k)1P 98.4.25 11:35 y[W 8

Kenwood R-A100 Specifications

General

Brand	Kenwood
Model	R-A100
Category	Amplifier
Language	English