18
■
Reviewing Messages in the Stack Memory
1 Press and hold the key programmed as [Selcall],
[Status], or [Selcall + Status] for 1 second to enter the
Stack memory.
• The last received message is displayed with the message
number.
2 Press the <B or C> key to select the desired message.
• Press and hold the S key to toggle between the call ID/
message and the channel name.
3 Press the Side 1 key to return to normal operation.
• To delete the selected message, press the A key. To
confirm the deletion, Press the S key.
• To delete all messages, press and hold the A key for
1 second. To confirm the deletion, Press the S key.
SHORT MESSAGES
This transceiver can receive short data messages which
contain a maximum of 48 characters.
• Received short messages are displayed the same as Status
messages. A maximum of 3 short message can be stored in the
stack memory, along with 5 Status messages.
GPS REPORT
To send your location data, you must first connect a GPS
microphone to the transceiver. GPS data can be transmitted
using 2 methods: auto transmission, and upon request only.
Ask your dealer for details.
To Next Page
Loading...
Need help?
General
