KERN 770-14 User Manual

96 770/GS/GJ-BA-defsi-0023
Some of the unit symbols printed on hard copy or output on a computer screen will differ
from the way they are shown on the balance display:
This applies to code numbers ending with 8 = tlh
9 = tls
10 = tlt
14 = /lb
15 = tlc
16 = mom
17 = K
18 = tol
19 = bat
20 = MS
3.4 Interface Parameter Settings
3.4.1 Baud Rate
150 Baud 5 1 1
300 Baud 5 1 2
600 Baud 5 1 3
1.200 Baud 5 1 4*
2.400 Baud 5 1 5
4.800 Baud 5 1 6
9.600 Baud 5 1 7
19.200 Baud 5 1 8
3.4.2 Parity
Mark Parity 5 2 1
Space Parity 5 2 2
Odd Parity 5 2 3*
Even Parity 5 2 4
3.4.3 Number of Stop Bits
1 stop bit 5 3 1*
2 stop bits 5 3 2
3.4.4 Handshake Mode
Software handshake 5 4 1
Hardware handshake with 2 characters after CTS 5 4 2*
Hardware handshake with 1 character after CTS 5 4 3
* = factory setting

KERN 770-14 Specifications

General

Brand	KERN
Model	770-14
Category	Scales
Language	English