TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112 47
Menu overview:
Unit 2
(see chapter 11.1)
(see chapter 11.2)
Continuous Continuous data transfer
PRINT button
Sending the stable weighing value after the
PRINT button is pressed
Not documented
–
Not documented –
PRINT + DPL
Printout conforming to GLP after the PRINT
button is pressed
Not documented
–
Not documented
–
(see chapter) 11.3)
Transmission speed
Automatic zero point
correction (see
chapter 11.4)
Auto zero OFF “Auto zero” function is off
Auto zero 1
Range of the “Auto zero” function ±½ digits
Auto zero 2
Range of the “Auto zero” function ±3 digits
Auto zero 3 Range of the “Auto zero” function ±7 digits
Auto zero 3E
Range of the “Auto zero” function ±7 digits
in the entire weighing range
(see chapter 11.5)
Filter 1
Dosing setting
Filter 2 Sensitive and fast — very calm setting item
Filter 3
Not sensitive but slow — not calm setting
item
(see chapter 11.6)
Stability 1
Fast stabilization check / very calm setting
item
Stability 2
Fast and accurate stabilization and check /
calm setting item
Stability 3
Accurate stabilization check / very uncalm
setting item
To Next Page
Loading...
Need help?
General
