7.7 Underfloor weighing
Objects which, because of their size or shape, cannot be put on the scale, can be weighed
by means of
underfloor weighing.
Proceed as follows:
Switch off the balance.
Turn the balance over, without loading the balance plate.
Open the cover plate on the base of the balance.
Hang on the hook for underfloor weighing .
Place the balance over an opening.
Hang the item to be weighed on the hook and carry out weighing.
Take care that the hooks used for the underfloor weighing are stable enough to hold
the goods which you wish to weigh (risk of breakage).
Always make sure that there are no living beings or materials below the load that
could be injured or damaged.
After completing the underfloor weighing, the opening in the floor of the balance
must be closed again (dust protection).
To Next Page
Loading...
Need help?
General
