6 Operation
6.1 Overview of the keypad
Key Pressed briefly Pressed for 10 sec
Switching the balance on
Tara-Function
Unit changing
Switching the balance off Adjusting function
6.2 Operating instructions
6.2.1 Weighing
The balance is switched on by pressing the key.
The balance performs auto-diagnostics (for 2 s) and then displays "0".
If the weighing object is heavier than the weighing range the display indicates "E"
(=Overload).
The balance is switched off by pressing the key once.
6.2.2 Taring
Place tare cup on the weighing plate and press key. The weighing indication
changes now to "0".The weight of the cup is now memorised.
Fill weighing object in the cup, read measuring value.
By pressing key, after the terminated weighing operation "0" appears again in
the display.
The taring procedure can be repeated several times, for instance to produce a mix-
ture of several components.
The limit is reached when the total weighing range has been used.
After removal of the tare cup the total weight appears as a negative value with „-„
mark.
EMB-BA-e-143412
To Next Page
Loading...
Need help?
General
