6.2.3 Units
Different foreign weighing units are integrated into the various balance models .
Change the Units with the key.
Press an hold the key , few seconds later change the unit.
Display Conversion factor
1 g =
Gramm g 1.
Unze oz 0.035273962
Troy Unze ozt 0.032150747
Pennyweight dwt 0.643014931
6.2.4 Dosage und Zero-tracking
When the Auto-Zero-function is activated, any slight changes of the zero readout are
automatically tared.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability compensa-
tion“ in the balance. (Example: Slowly draining fluids from a container on the bal-
ance.)
Having dosages with slight changes of weight it is recommended to deactivate this
function.
With switched off Zero-Tracking the display however is more unstably.
Activate/deactivate Zero-Tracking
When the balance is switched off, press the OFF -key and keep it pressed
Do not release the OFF -key. Press also the ON/TARE-key and keep it pressed
Keep the ON/TARE-key pressed, however release the OFF -key
Press OFF -key anew
Keep both keys pressed until in the display “tr” appears
Release both keys. The balance is situated in the menu.
Press the ON/TARE-key until „tr“ appears
Confirm with the OFF key
EMB-BA-e-1434 13
To Next Page
Loading...
Need help?
General
