Press and hold the TARE and ON/OFF buttons
simultaneously to enter the setup menu.
Wait until the first menu item <Cal > is displayed.
Confirm by ➔ button, <CalExt > will be displayed.
Confirm by pressing the ➔ button, the first selectable
adjustment weight is displayed.
Use the navigation keys to select the desired
adjustment weight, see chap. 1 „Adjustment points“ or
„Recommended adjustment weight“ Numerical input, see
chap. 3.2.2
Prepare the required adjustment weight.
Acknowledge selection by ➔ button.
< Zero >, < Pt ld > followed by the weight value of the
adjustment weight to be placed will be displayed.
To Next Page
Loading...
Need help?
General
