40 FKB-BA-e-2010
14.4.3 Automatic data output < auto >
Data output happens automatically without having to press the PRINT-key as soon as
the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:
In Setup menu invoke the menu setting < Print PrMode > and
confirm with button .
For an automatic data output select the menu setting < auto > with the
navigation keys and confirm with the button.
Use the navigation keys to select the setting < on > and confirm with button.
< zRange > is displayed.
Confirm with button and set the required output condition with the navigation
keys .
Confirm with button.
To exit the menu press the navigation key repeatedly.
Place goods to be weighed on balance:
If required, place empty container on scale and tare.
Place weighed goods and wait until the stability display ( ) appears.
The weighing value is issued automatically.
14.4.4 Continuous data output < cont >
Enable function and set the output interval:
In Setup menu invoke the menu setting < Print PrMode > and confirm
with button.
For a continuous data output select the menu setting < cont > with the
navigation keys and confirm with the button.
Use the navigation keys to select the setting < on > and confirm with button.
<spedd> is displayed.
Acknowledge with the button and set the required time interval with the
navigation keys (numeric input see chap. 3.2.2)
To exit the menu press the navigation key repeatedly.
Place goods to be weighed on balance.
If required, place empty container on scale and tare.
Place goods to be weighed on balance.
The weighing values are issued according to the defined interval.
To Next Page
Loading...
Need help?
General
