34 FOB-BA-e-1821
9.6 Weighing with tolerance range (FOB, FOB-LM models only)
You can set an upper or lower limit when weighing with tolerance range and thus
ensure that the weighed load remains exactly within the set limits.
During tolerance tests such as dosing, portioning and sorting the unit will indicate
exceeded or undershot limits by emitting an optical or acoustic signal.
Displayed
triangle next to
Weight of the weighed
item
Acoustic signal
background
illumination of the
Target weight within
tolerance range
2 short beeps
-
Target weight below lower
tolerance limit
no beep
+
Target weight above upper
tolerance limit
If <Err> is displayed, the
maximum load of the
balance is exceeded.
perpetual tone
To Next Page
Loading...
Need help?
General
