FTx/ITx-SH-e-0720 69
8.5 Interface data
FTB/FTC compact scales and KMB-/KMS-/KMT-TM terminals (ITB/ITS/ITT) terminals are fitted as standard with one RS232C
interface (DIN 66020; CCITT V24/V.28). They are optionally available with an additional interface (RS232, Ethernet, Digital
I/O (only KMT-TM, ITT) or analog second scale interface (KMS-/KMT-TM,ITS/ITT and FTC)).
The pins of individual interfaces are assigned as below:
Pin view of connector
RS232C standard interface
Pin COM1 (RS232)
1 VCC (+5V power supply)
2) 4)
2 TxD 1 (transmit data)
3 RxD 1 (receive data)
4
3)
5 GND (signal ground)
6
3)
7
3)
8
3)
9
3)
2)
The VCC load on one interface must not exceed 100 mA
3)
must not be connected
4)
can be deactivated in the scale menu
53214
6789
To Next Page
Loading...
Need help?
General
