Then appears for 2 seconds the weight of both test
items, before the weight of the second test item will
appear again.
With the further samples proceed as described above.
In order to display the total weight of the samples, remove weight from the weighing
plate, wait for the zero display and press . The number of weighing actions and
the total weight of the samples will be displayed shortly.
The totalizing function is not available in sale mode.
Start balance by pressing
.
The balance will carry out a self-test.
Wait for „0.0“ display.
Put on the first sample
The weight of the first sample is displayed.
Press , „ACC 1“ is shortly displayed, then
appears once more the weight of the sample which
now is stored.
Remove the first sample and put on the second one.
The weight of the second sample is displayed.
To Next Page
Loading...
Need help?
General
