12English
Vented Enclosures
These boxes are the enclosure of
choice if space is not a problem and
you want to get the most output and low
freqeuncy extension from your CompC
subwoofer. CompC subwoofers will handle
massive amounts of power in any of the
recommended enclosures, minimum or
maximum. The smaller enclosures are
best for use in limited-space applications.
The larger recommended enclosures
will yield slightly more bass at the lowest
frequencies.
Vented Minimum CWC8 CWC10 CWC12 CWC15
Box Volume, ft
3
[L] .66 [18.7] 1.25 [35.4] 2.25, 63.7 3 [85]
Port Opening, in. x in.
[cm x cm]
1.5X8
[3.8X20]
1.5X10.5
[3.8X26.7]
2X12.5
[5.1X31.8]
3X15.5
[6.4X39.4]
Port Length, in. [cm] 18, [45.7] 14.5, [36.8] 16, [40.6] 17, [43.2]
Power Handling, RMS 200 250 300 450
Vented Maximum CWC8 CWC10 CWC12 CWC15
Box Volume, ft
3
[L] 1.2, [34] 1.75 [49.6] 2.25 [63.7] 4, [113.3]
Port Opening, in. x in.
[cm x cm]
1.5X8
[3.8X20.3]
1.5X10.5
[3.8X26.7]
2X12.5
[5.1X31.8]
3X15.5
[7.6X39.4]
Port Length, in. [cm] 12.25, [31] 13.25, [33.7] 16.375, [41.6] 16.25, [41.3]
Power Handling, RMS 200 250 300 450
The Vented Minimum design increases
bass efficiency and fits in many space-
limited applications. Although it is the
smallest recommended ported enclosure,
the output from 30 to 80 Hz will be
considerably higher than that of any sealed
box. The Vented Maximum design has even
more output in this frequency band. The
Maximum is the largest and most efficient
enclosure design.
To Next Page
Loading...
Need help?
General
