17
WARNING! Use only the batteries specified. Use of differ-
ent batteries may have a detrimental effect on the Smoke/CO
alarm. A good way to remember is to do this when you put
your clocks back one hour in the Autumn
Following battery installation test the alarm and if it
fails to work contact the manufacturer on 0800 917
0722
Alarm ReplacementAlarm Replacement
Ten years after initial power-up, this unit will “chirp” twice
every 30 seconds to indicate that it is time to replace the
alarm. A label has been provided on the side of the alarm
that has “Replace by” printed on it. Write the replace by
date on the label. The date written on the label should be
ten (10) years after the alarm was initially powered.
This alarm does have end of life Hush
®
which allows you to
silence the trouble chirp for two days giving you exrtra time
to replace the unit at a more convenient time. To activate,
press the test/reset button. While in the End of Life Hush
®
mode, will still detect CO and Smoke. This feature can only
be used for 30 days from the time the unit first indicates
end of life. At the end of the 30 day period the alarm can-
not be hushed and must be replaced immediately.
REPLACE IMMEDIATELY!
General MaintenceGeneral Maintenance
To keep your Smoke/CO Alarm in good working order,
please follow these simple steps:
• Verify unit alarm, lights and battery operation by pushing
the test/reset button once a week.
• Clean your alarm monthly using compressed air or a
vacuum cleaner hose and vacuuming or blowing air
through the openings around the perimeter of the alarm.
If cleaning does not restore your alarm to normal
operation the alarm should be replaced.
General Maintenance
Battery Replacement
To Next Page
Loading...
Need help?
General
