To Next Page

To Previous Page

13. Cleaning Your Alarm

Your Alarm Should be Cleaned at Least Once a Year

You can clean the interior of your alarm by using compressed air or a vacuum cleaner hose and blowing or

vacuuming through the openings around the perimeter of the alarm. The outside of the alarm can be wiped

with a damp cloth. Use only water to dampen the cloth, use of detergents or cleaners could damage the alarm.

If the alarm is in Fault mode, the alarm may be in need of cleaning. After cleaning, press the test button. If the

fault does not clear, the alarm needs to be replaced.

• Never use detergent or other solvents to clean the unit.

• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.

• Do not paint the unit. Paint will seal the vents and interfere with the sensor’s ability to detect CO.

• Keep away from nappy buckets.

• Never attempt to disassemble the unit to clean inside. Altering the alarm in any way may lead to a risk of

electric shock or prevent it from functioning correct

ly. This action will void your warranty.

• The following substances can aect the CO sensor and may cause false readings and damage to the sen-

sor: Methane, propane, isobutane, iso-propanol, ethyl acetate, hydrogen sulde, sulde dioxides, alcohol

based products, paints, thinner, solvents, adhesives, hair spray, aftershave, perfume, and some cleaning

agents.

NOTE: there could be other compounds occurring within a particular household which could cause similar

eects.

• Move the Ala

rm and place in another location prior to performing any of the following:

Staining or stripping wood oors or furniture

Painting

Wall papering

Using adhesives

Storing the unit in a plastic bag during any of the above projects will protect the sensors from damage. When

household cleaning supplies or similar contaminates are used, the area must be well ventilated.

WARNING: REINSTALL THE ALARM AS SOON AS POSSIBLE TO ENSURE CONTINUOUS

DETECTION.

Kidde K5CO User Manual

Questions and Answers: