Kidde KN-COPP-3 User Manual

DC Powered in Battery Backup Operation
LED Display Alarm Sound Unit Status Unit Condition Recommended
Shows Action
If at any time you test the alarm and it does not perform as described, have it replaced immediately.
Handling
• Do not use the battery for a purpose other than for the alarm it is
specified.
• Do not recharge the battery using any charging circuit other than the one
provided in the alarm. A recharging operation under non-conforming
recharging conditions can cause electrolyte leakage, overheating,
smoke emission, bulging/bursting and/or ignition.
• Do not discard the battery into fire or heat it under any circumstances.
Otherwise, it may cause the battery to explode. Do not connect the
battery to an electrical outlet.
Display Readings
Li-Ion Battery Handling Precautions
32
“0” or CO
concentration
and “Lb”
displayed
once every 60
seconds,
flashing dot
every second.
1 “chirp”
every 15
seconds
Battery conserve
mode, sensing for
CO.
Battery is partially
discharged, after
5 minutes of
operation on
battery backup.
Confirm battery
connection is fully
seated & oriented
properly. Connect
to AC power to
fully charge
battery. Contact
Kidde customer
service if condition
continues.
Flashing dot
once every 60
seconds.
1 “chirp”
every 60
seconds
Unit in trouble
alarm. Mode will
continue for
approximately 7
hours. WILL NOT
DETECT CO.
Operation on
battery backup
and battery is
fully discharged.
Confirm battery
connection is fully
seated & oriented
properly. Connect
to AC power to
fully charge
battery. Contact
Kidde customer
service if condition
continues.
None. None. Unit is not
operational. WILL
NOT DETECT CO.
Battery
disconnected or
missing.
Confirm battery
connection is fully
seated & oriented
properly. Connect
to AC power to
fully charge
battery. Contact
Kidde customer
service if condition
continues.

Kidde KN-COPP-3 Specifications

General

Brand	Kidde
Model	KN-COPP-3
Category	Carbon Monoxide Alarm
Language	English