19
INTERCONNECT CAPABILITY
This model has AC hardwire alarm interconnect capability. When one hardwire interconnected unit sounds
an alarm, all other compatible hardwire interconnected units will also alarm. This model is not designed to be
interconnected with other manufacturer’s products, unless otherwise specified.
AC HARDWIRE INTERCONNECT MODEL COMPATIBILITY
• The following models can be interconnected using the standard AC wiring interconnect: i12020CA,
i12020ACA, i12040CA, i12040ACA, i12060CA, i12060ACA, i12010SCA, i12010SCOCA, KN-SMFM-I-CA,
KN-COB-ICB-CA, KN-COSM-IBCA, KN-COB-IC-CA, KN-COSM-ICA, KN-COP-IC-CA, KN-COPE-ICA,
P12040CA, Pi2000CA, Pi2010CA, SM120X, CO120X, SLED177iCA, P4010ACLEDSCA, P4010ACLEDSCOCA,
P4010ACLEDSCA-2, P4010ACLEDSCOCA-2, P4010ACSCO-WCA, P4010ACSCOCA, P4010LACS-WCA,
P4010ACSCA, P4010ACS-WCA.
10. Operation and Testing
OPERATION
The alarm is operating once it is activated and testing is complete. When products of combustion (smoke or
CO) are sensed, the unit sounds a loud alarm with Strobe flashing and voice messages. See Sections 1 and 2 for
alarm signal descriptions. In high levels of CO, the unit will go into alarm in a shorter period of time than at low
levels of CO.
LANGUAGE SELECTION
This unit operates in either English or French. At initial power up, the unit will default to English, and announce
“English Language selected - Pour française appuyer 2 fois sur le bouton.”
To switch your language preference at any time, press the Test button twice on ALL devices you wish to connect.
You should hear one beep for each button press, followed by a voice message confirming your language selection.
If French is selected, the unit will announce “Langue française selectionné - For English, press button twice.”
To Next Page
Loading...
Need help?
General
