Kipor IG2000P User Manual

5.3 Inspection
● Float height
Place the carburetor as the picture shows, measure the float height between float and carburetor block.
Height 12mm
Replace the float if the float height is not the right size.
● Stepping motor
Measure the resistance of stepping motor lead-out wire.
Between 1and 3：45~55Ω
Standard resistance
Between 2 and 4：45~55Ω
Replace the stepping motor if the resistance excesses the above range.
2
1
4
3
33

Kipor IG2000P Specifications

General

Brand	Kipor
Model	IG2000P
Category	Portable Generator
Language	English